9491 Posts - Page: Previous | 1 | ... | 330 | 331 | 332 | 333 | 334 | 335 | 336 | 337 | ... | 475 | Next

Recent Posts for the Entire Site

ThouUte
Toowoomba QLD
Joined: 10-Feb 2011
565 posts
Post #6641 | Monday, 13-Feb 2012 @ 8:44pm
"be good to see it with the wheels on they look sweet, you still gonna keep the flares black?   what gearbox you running? it sits near the same as the a12 setup. how much extra power you expect to get with this head setup? it sits fairly high your gonna..."
NOW JIMNY powered B20  |  Read full post
paddy
adelaide
Joined: 15-Jul 2011
91 posts
Post #6642 | Monday, 13-Feb 2012 @ 8:14pm
"hey guys, i was wondering what people have done with the adjusting shims on the upper control arms (the ones used for adjusting camber and castor). Are there places you can buy these? i have two sets in my car but still need more for my desired..."
camber/ castor adjusting shims  |  Read full post
Booyar
Wagga Wagga NSW
Joined: 13-Mar 2011
46 posts
Post #6643 | Monday, 13-Feb 2012 @ 8:09pm
"Hey Leigh,   Yeah, still have the FRP bonnet, now just looking to modify it too! I seem to be modifying everthing at the moment. I like the old school skyline grey and stumbled across the "Millenium Jade" colour by accident. Instantly loved the..."
NOW JIMNY powered B20  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1191 posts
Post #6644 | Monday, 13-Feb 2012 @ 4:40pm
"What is stopping you from droping the motor lower? Im not familiar with the G13B so this may be a stupid question, sorry if it is.   My little brother and I did an engine swap into his hilux and needed to change his oil sump and relocate the oil pick up..."
NOW JIMNY powered B20  |  Read full post
ThouUte
Toowoomba QLD
Joined: 10-Feb 2011
565 posts
Post #6645 | Monday, 13-Feb 2012 @ 3:41pm
Edited by ThouUte
Monday, 13-Feb 2012 @ 3:42pm
"so you still using the frp bonnet trav?   is it metallic? i like the gtr blue its nice, as long as its not hot pink i think your pretty safe haha. im being boring and sticking with white then contemplating wrapping it with matte white vinyl"
NOW JIMNY powered B20  |  Read full post
Booyar
Wagga Wagga NSW
Joined: 13-Mar 2011
46 posts
Post #6646 | Monday, 13-Feb 2012 @ 1:26pm
"...and that is the story up until today. I've got to replace the floor pans on both sides, fit a transmission tunnel and then I'll remove everything again and strip it for paint. Considering this for colour...   "
NOW JIMNY powered B20  |  Read full post
Booyar
Wagga Wagga NSW
Joined: 13-Mar 2011
46 posts
Post #6647 | Monday, 13-Feb 2012 @ 1:17pm
Edited by Booyar
Monday, 13-Feb 2012 @ 1:23pm
"Now... I've been on holidays for a week and have been busy with the engine. For those that don't know, I've gone for a Suzuki Swift GTi G13B, with a Vitara 1.6ltr SOHC head. Reason being I am going to turbo the little beast and the SOHC should flow..."
NOW JIMNY powered B20  |  Read full post
Booyar
Wagga Wagga NSW
Joined: 13-Mar 2011
46 posts
Post #6648 | Monday, 13-Feb 2012 @ 1:05pm
"and some flares to keep them under...   Little more progress. After studying for the past 9 months, the cash is starting to flow a little more. Got these in the mail today. Got these from the UK for $160(AUD) posted! Bargain. If anyone is keen, I can get..."
NOW JIMNY powered B20  |  Read full post
Booyar
Wagga Wagga NSW
Joined: 13-Mar 2011
46 posts
Post #6649 | Monday, 13-Feb 2012 @ 1:04pm
"Found a set of rims I liked...   They are 2x (14 x 7 +0) and 2 x (14x7.5 -6). They are apparently Magsports but I can't find any info on them. "
NOW JIMNY powered B20  |  Read full post
Booyar
Wagga Wagga NSW
Joined: 13-Mar 2011
46 posts
Post #6650 | Monday, 13-Feb 2012 @ 12:57pm
"Then I played with LEDs...   I managed to get my hands on a set of rear tail lights for the B20, but no luck finding the rest of the assembly. I decided that I would go with LEDs as I could have a go at something myself and if it worked out I thought it..."
NOW JIMNY powered B20  |  Read full post
Booyar
Wagga Wagga NSW
Joined: 13-Mar 2011
46 posts
Post #6651 | Monday, 13-Feb 2012 @ 12:56pm
Edited by Booyar
Wednesday, 01-May 2013 @ 10:24am
"Hey all,   Can't believe that I haven't posted my little project up here yet. Bare with me, I'm going to doing a quick intro and then update you all with where I am up to...   Here is my little project car. Its a 1969 Datsun 1000 ute that I picked up for..."
NOW JIMNY powered B20  |  Read full post
bina08
Brisbane
Joined: 11-Aug 2011
146 posts
Post #6652 | Sunday, 12-Feb 2012 @ 9:24pm
"No, not going back to smaller wheels. It's just that the hydraulic ratio is wrong, and using the 1200 calipers should fix it. They are actually a bit bigger.   And Paddy, if I can get the 1200 brakes and get them working at least as well as these, I'll..."
1200 disk brake conversion  |  Read full post
paddy
adelaide
Joined: 15-Jul 2011
91 posts
Post #6653 | Sunday, 12-Feb 2012 @ 8:16pm
"i can't help you out (sorry)... what would you be doing with your old brake setup? "
1200 disk brake conversion  |  Read full post
derrick719
three hills alberta canada
Joined: 11-Feb 2011
231 posts
Post #6654 | Sunday, 12-Feb 2012 @ 4:35pm
"has less rust then my car"
Cars and items of interest spotted on ebay etc  |  Read full post
revhead001
Melbourne
Joined: 09-Jul 2011
70 posts
Post #6655 | Sunday, 12-Feb 2012 @ 7:44am
"http://www.ebay.com.au/itm/DATSUN-1000-UTILITY-/190639208479?pt=AU_Cars&hash=item2c62fb781f   For 10% of the price I can sell you one just as rusty..."
Cars and items of interest spotted on ebay etc  |  Read full post
derrick719
three hills alberta canada
Joined: 11-Feb 2011
231 posts
Post #6656 | Saturday, 11-Feb 2012 @ 5:45pm
"i would love to buy those but i dont have the money too"
F/S NOS Keihin CVT bike carbs  |  Read full post
revhead001
Melbourne
Joined: 09-Jul 2011
70 posts
Post #6657 | Saturday, 11-Feb 2012 @ 3:11pm
"The mounting boss for the carbys at the throttle side, all 4 measure 46.84mm. The distance between the 1 and 2 is 31mm,  between 2 and 3 is 40mm, between 3 and 4 is 31mm. As they are mounted using rubber bends there is a little bit of forgiveness there. I..."
F/S NOS Keihin CVT bike carbs  |  Read full post
beetwenty
Gold Coast, Australia
Joined: 05-Feb 2011
1191 posts
Post #6658 | Saturday, 11-Feb 2012 @ 9:10am
"Some footage of the 1000's in the assembly line. I have no idea about what they are saying as I don't speak spanish. (I think they are speaking spanish) the 1000 stuff starts just before the 6 min mark. (Not too much of it, but I thought I would share it..."
Datto Vids on you tube  |  Read full post
DatsAmore
Perth, Western Australia
Joined: 03-Dec 2011
239 posts
Post #6659 | Saturday, 11-Feb 2012 @ 12:16am
"Happy Birthday 1000.com!  It's a privelige and honour to be a part of it.I have only been a member for only a few months, but my love for the VB goes way back to birth.   I credit my love for the little VB10 to me dear old Dad (Rest in Peace, Pa).  He..."
Datsun1000.com is now one year old.  |  Read full post
Neil
Perth Western Australia
Joined: 03-Mar 2011
492 posts
Post #6660 | Friday, 10-Feb 2012 @ 10:08pm
"I like birthdays...as long as they aren't mine   Wheres the cake ?"
Datsun1000.com is now one year old.  |  Read full post
9491 Posts - Page: Previous | 1 | ... | 330 | 331 | 332 | 333 | 334 | 335 | 336 | 337 | ... | 475 | Next